大鹏湾春季海水理化因素与拟尖刺菱形藻种群密度的灰色系统模型研究

对1990年3月30日－6月25日在大鹏湾盐田海域的海水采样结果，用灰色理论的系统分析方法研究并计算大鹏湾地区海水中的拟尖刺菱形藻与浮游动物数量等15个海水理化因子变化的灰关联度，关联排序结果表明：浮游动物、Fe、浊度、Me、DO、V、Se、酸碱度、盐度和温度对拟尖刺菱形藻的种群增殖态有着较大的影响。进而建立灰色系统模型{GM（1，h )}对拟尖刺菱形藻种群增殖的动态辨识分析。     

Prenatal diagnosis of GM2-gangliosidosis B1 variant

Prenatal diagnosis in a pregnancy at risk for a juvenile B1 variant of GM₂-gangliosidosis was carried out. The biochemical study of the cultured amniocytes and the affected fetal brain is reported. The results obtained show that the sulphated artificial substrate can be used in the diagnosis of B1 variant, but not the neutral one. The accumulation of GM₂-ganglioside in the fetal brain of the B1 juvenile form and an infantile form of GM₂-gangliosidosis (0 variant) was compared.     

Prenatal diagnosis of neurofibromatosis type 1: From flanking rflps to intragenic microsatellite markers

Even though the neurofibromatosis type 1 (NF1) gene was cloned more than 3 years ago, the process of identifying mutations has not been fruitful, and genetic counselling is mainly based on the use of linked markers. Since 1990, we have analysed 130 NF1 families and have performed six prenatal diagnoses. In each case, genetic counselling has relied on linked markers and informativity was achieved in all of them. The use of intragenic microsatellite polymorphisms (IVS27AAAT2.1, IVS27AC28.4, IVS27AC33.1, and IVS38GT53.0) has increased the informativeness in our series of NF1 families to an average of 90 per cent, providing accurate diagnosis and confirmation of the disease status.     

催化超临界水氧化处理1,5-萘二磺酸

采用Mn2O3/γ-AL2O3和V2O5/γ-Al2O/为催化剂,在一连续流固定床反应器中进行了超临界水氧化1,5-萘二磺酸实验.实验结果表明,在380～440℃,24 MPa条件下,Mn2O3/γ-Al2O3和V2O5/y-Al2O3催化剂对1,5-萘二磺酸的氧化降解具有显著的促进作用,TOC去除率达到90%以上;催化剂的催化效果随反应温度的升高而增强,随pH值的降低而增强,随停留时间的延长先增强后趋于平缓.     

Determination and discussion hydraulic retention time in membrane bioreactor system

Based on the microorganism kinetic model, the formula for computing hydraulic retention time in a membrane bioreactor system (MBR) is derived. With considering HRT as an evaluation index a combinational approach was used to discuss factors which have an effect on MBR. As a result, the influencing factors were listed in order from strength to weakness as: maximum specific removal rate K, saturation constant Ks, maintenance coefficient m, maximum specific growth rate ,ua and observed yield coefficient Yobs. Moreover, the formula was simplified, whose parameters were experimentally determined in petrochemical wastewater treatment. The simplified formula is θ= 1.1( 1/β -1)(Kｓ S)/KXo , for oetroehemical wastewater treatment K and Ko eaualed 0.185 and 154.2, resoectively.     

Cu／A1-Ce-PILC在丙烯选择性催化还原NO反应中的失活研究

采用聚合羟基复合阳离子合成交联黏土A1-Ce-PILC，经SO4^2-改性后，以浸渍法制备了铜基交联黏土催化剂Cu／A1-Ce-PILC，并将其应用于C3H6选择性催化还原NO的反应，350℃时NO转化率达到最大值56％，700℃时下降至22％．为探究催化剂高温失活的原因，采用XPS、TPR、TGA、Py-IR和DSC对反应前后催化剂的物化性能进行了表征．结果表明，经过H2预处理活化后活性组分Cu物种以Cu^＋形式存在，而高温反应后Cu物种除以Cu^＋和Cu^2＋ 2种形式存在外，还出现了少量CuO物种；高温反应过程中A1-Ce-PILC上结构羟基和SO4^2-流失导致催化剂表面酸性减弱；此外，还存在表面积炭覆盖了部分活性中心并堵塞了催化剂孔道的现象．这三者的共同影响促进了C3H6深度氧化，抑制了NO还原，从而导致催化剂的失活．     

Enzymatic degradation of poly([R,S] β-hydroxybutyrate)

The synthetic analogue of a bacterially produced polyester, poly(-hydroxybutyrate) (PHB) was synthesized from racemic -butyrolactone using anin situ trimethyl aluminum-water catalyst. The polymer was fractionated into samples differing in molecular weight and isotactic diad content. The latter was closely related to degree of crystallinity. The biodegradation of these fractions were examined by monitoring mass loss over time in the presence of anAlcaligenes faecalis T1 extracellular bacterial poly(-hydroxybutyrate) depolymerase. The fraction with high isotactic diad tacticity content showed little or no degradation over a 50 hour incubation period, whereas the fraction of intermediate isotactic diad content degraded in a continuous steady fashion at a rate that was less than that for bacterial PHB. The low isotactic diad fraction underwent a rapid initial degradation, followed by no further mass loss. The presence of stereoblocks in the polymer structure of the various fractions was an influence on the degree of susceptibility towards degradation and is related to sample crystallinity.     

无机高分子絮凝剂聚硅铝铁硼的制备及其絮凝性能研究

以工业水玻璃、氯化铝、氯化铁、硼酸为原料，制备了一种性能优良的无机高分子絮凝剂聚硅铝铁硼(PSBFA)。通过考察不同pH值条件下水玻璃的胶凝时间、Si／Al物质的量比、硼的浓度、熟化时间等因素对聚硅铝铁硼产品应用性能的影响，确定了聚硅铝铁硼的最佳制备条件为pH值为2～4，Si／Al物质的量比在1．0左右，硼的浓度为0．02mol／L，熟化时间为5d左右。絮凝应用实验表明，聚硅铝铁硼对于印染废水脱色效果、生活污水的COD去除率具有优异的絮凝性能；与传统混凝剂硫酸铝和市售混凝剂聚合氯化铝(PAC)相比，PSBFA的具有投加量少、沉降速度快、絮体体积小等优点。     

复合絮凝剂XG用于工业废水的处理

利用自制的复合絮凝剂 XG处理多种工业废水 ,研究了废水处理工艺过程和处理条件对絮凝剂处理废水效果的影响。实验结果表明 ,XG应用于造纸、毛巾厂、化工等工业废水处理 ,CODCr去除率达 75%～ 80 % ,脱色率 >80 % ,处理操作工艺简单 ,成本低 ,处理效果优于聚合氯化铝。     

氨基淀粉絮凝剂合成工艺

以玉米淀粉为原料，以环氧氯丙烷(ECH)作交联剂，合成高交联淀粉(CS)；以HC1O4作引发剂，以ECH作醚化剂，合成中间产物3-氯-2-羟基丙烯基交联淀粉(CHCS)，在碱性条件下再与乙二胺反应，得到对重金属离子具有螯合能力的氨基淀粉(CAS)。最佳醚化条件：CS含水质量分数为7．0％，ECH与CS的摩尔比为2．5：1，HC104与CS的摩尔比为0．03：1，反应时间为8h，反应温度为95℃。以该法制得的CAS对废水中铜离子的去除能力为78．5mg／g。